Working with Woven and Dyed Panels

Another project involving woven panels. For this one I made two warps of a rayon/flax blend yarn. I folded the warps into packages, then bound each bundle tightly with plastic strips, and dyed in indigo, for an ikat-like effect. Thinking the weaving would go quicker if I dressed the loom with two similar warps, separated by a few inches, I threaded the loom with side by side warps about 8 inches wide and approximately 4 yards long. Live and learn – this did not hasten the process of weaving, which required throwing the shuttles separately on each warp for every row. I used a navy fine rayon boucle yarn for a textured weft.

This project is similar to the Mexican-inspired one, but I added enough extra warp for sleeves. I wove two long panels and 4 shorter ones: two for the center panels and two for sleeves. I folded over one short edge of the center panels and trimmed the warp ends to an inch. I just overlapped the long edges and zig-zagged with navy thread. The sleeves are made by folding one short edge on a 45° angle and stitching the other short edge to the folded portion of the long edge. See Virginia West’s A cut above: Couture clothing for the fibre artist for an illustration of the technique. The top is soft, drapey and comfortable, and will be cool for summer.

Dressing the loom with two side by side warps.
Weaving the separate warps with two shuttles.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s